NEW ARRIVALS
VABKPM
MODULAR BIPOD - KEYMOD/ PICATINNY/ M-LOK
  • KPM Modular Bipod had a lot of innovative features. A modular mounting system that allows you to mount the KPM bipod to KeyMod™, Picatinny, or M-LOK® handguards/ rails/ and slots.
  • Includes three different types of mounting hardware for mounting onto: Weaver/ Picatinny/ MIL-STD 1913 rails, KeyMod™, and M-LOK® slots. Simply swap out the mounting hardware on top of the bipod and you can mount it onto virtually any modern handguard. Picatinny mount is an auto locking quick release mount, allows you quickly mount and dismount the bipod, without the use of a tool.
  • The modular bipod feet can be setup into 4 different configurations to adapt to various terrain types. Bipod feet can be setup with the rubberized feet (without and with the spikes extended) or the claw feet (without and with the spikes extended).
  • Spring loaded folding action for quick deployment of the bipod legs.
  • Spring loaded notched legs can be individuall set to different lengths with a push of a button and the bipod legs lock in place.
  • Bipod legs lengths can be adjusted from 8.5" to 11.5".
  • High quality construction with hard anodized aluminum and steel construction
  • Height: 11.5" Fully Extended
  • Height: 8.5" Collapsed
  • Weight:
  • US Patent Pending
VD4BKM
KEYMOD™ QUICK RELEASE 4 RETICLE REFLEX OPTIC
  • KeyMod™ Quick Release 4 Reticle Reflex Optic
  • This heads up reflex optic combines our popular 4 reticle D4B with our new Patented KeyMod™ quick release mount.
  • You can mount VD4BKM onto KeyMod™ handguards at an offset angle (30°/45°) for a secondary optic to your primary, for close range target acquisition and for moving targets.
  • You can also mount the VD4BKM directly to the top KeyMod™ slots of our AK KeyMod™ Mount Receiver Cover (VMTAKKM).
  • Selector switch at the back of the optic, allows you to select the desired reticle. RED colored four reticle set: Dot, Bullseye, Cross, and Bullseye
  • LED (Light Emitting Diode) 100% safe for the eyes.
  • Unlimited eye relief for flexible mounting.
  • 7 brightness settings for reticles.
  • Black anodized aluminum construction.
  • Tools for adjust Reflex optics and rubber lens cap are included.
  • Featuring NcSTAR's US Patented Auto-Locking KeyMod™ Quick Release mount. Mounts directly to KeyMod™ slots with a flip of a lever, no tools required.
  • US Patent 9,341,441
VDDABKM
KEYMOD™ QUICK RELEASE MICRO RED DOT
  • KeyMod™ Quick Release Micro Red Dot
  • This optic and mount combo combines our popular DDAB Micro Red Dot optic with a our new Patented KeyMod™ quick release mount with heavy duty protective side armor shields for the added protection for the Micro Dot optic.
  • You can mount VDDABKM onto KeyMod™ handguards at an offset angle (30°/45°) for a secondary optic to your primary, for close range target acquisition and for moving targets.
  • You can also mount the VD4BKM directly to the top KeyMod™ slots of our AK KeyMod™ Mount Receiver Cover (VMTAKKM).
  • Modular design, allows you to use the skeletonized riser for offset mounting and a comfortable cheek rest on the stock. Or if you require a low profile mounting you can remove the riser and mount the Micro Dot base directly to the KeyMod™ mount for when the lowest profile mounting position is desired.
  • Skeletonized riser and armored shield to keep the weight to a minimum, yet provide strength and protection where needed.
  • Featuring NcSTAR's US Patented Auto-Locking KeyMod™ Quick Release mount. Mounts directly to KeyMod™ slots with a flip of a lever, no tools required.
  • US Patent 9,341,441
VMSPRBV2
GEN 2 CANTILEVER SCOPE MOUNT W/DUAL QR MOUNT
  • Generation 2 30mm cantilever scope mount with 45° offset rail for a secondary compact optic.
  • New and improved design. It is both shorter in overall length and lighter than the previous generation, yet allows more fore and aft scope adjustment between the rings for adjusting eye relief.
  • Scope centerline is at 1.5" AR15 Height.
  • Includes 1" scope ring inserts, and a reversible (left or right side) 45° offset rail mount for mounting a secondary optic, such as a Micro Dot Reflex Optic for close range targets acquisition and moving targets.
  • Dual locking quick release mounts with more compact levers, allows you to quickly mount Weaver, Picatinny, and MIL-STD 1913 rails.
  • Black anodized aluminum construction
  • Length:
  • Weight:
VKARB1
BLASTAR KIT FOR AR15/ M4 CARBINES
  • BlastAR Kit for AR15/M4 Carbines is a four piece kit designed to transform the look of your standard M4 carbine into Sci-Fi/ Video Game/ Futuristic BlastAR.
  • For those shooters with multiple M4s or people that just want to transform the look of the M4 to a futuristic looking and functioning Blaster that looks like no other ordinary M4 carbine at your local shooting range.
  • The BlastAR kit includes: Forward Carry handle and optic riser (aluminum), Triangular Handguard (aluminum), Magazine Well Funnel (aluminum), and a Thumbhole Stock (Polymer construction).
  • The Forward Carry handle is designed to bridge between the upper receiver and any handguard with a top mounted Picatinny rail at the same height as the receiver. The carry handle will encompass the standard 'F' type front sight post, yet it the front sight is still useable with the use of a rear aperture sight. The forward carry handle allows space for the mounting of a rear sight on the upper receiver, making the iron sights of your M4 Carbine functional. There is also a short riser that is still at a comfortable height for mounting optics onto your carbine. Black anodized aluminum construction.
  • The Triangular handguard is an Extended Carbine handguard. Mounts onto standard AR15/M4 carbines: with carbine length gas systems, delta rings, and front carbine handguard caps. Drop in fit. The extended carbine handguard encompasses and mounts forward of the front sight post. Top Picatinny rail at the receiver height, KeyMod™ slots at the 11/1/6 O'clock positions for KeyMod™ accessories. Black anodized aluminum construction.
  • Thumbhole stock mounts onto Mil-Spec M4 Carbine buffer tubes. Thumbhole stock slides over the Mil-Spec buffer tube and secures with two bolts, one inside the pistol grip and a bolt through the underside of the stock into bottom catches of the buffer tube. Features: QD sling cups, storage compartment in the pistol grip with a trap door, storage compartment in the back of the stock with a removable recoil pad. The thumbhole stock will include a plate to block off the thumbhole stock for those shooters that want to configure the carbines into a California featureless semi-auto. Stock is made from black polymer.
  • You may use some or all of the BlastAR kit components to customize the look of your M4 carbine.
  • Combine with NcSTAR & VISM advanced optics and accessories to give your M4 carbine a functional and futuristic look.
  • US Patent Pending
VAARVGQRKM
KEYMOD™ QUICK RELEASE VERTICAL GRIP - BLACK
  • KeyMod™ Quick Release Short Vertical Grip with battery storage compartment.
  • Ergonomic shape for a comfortable and secure grip. Texture front, side panels, and rear grip surfaces.
  • Mounts onto KeyMod™ slots without the need of any tools. Lift the two locking wings to the upright position (open), slide the KeyMod™ shoes into the KeyMod™ spec slots and then fold the locking wings back down (locked) until the snap closed to lock the vertical grip in place.
  • Center core also can store a single CR123A or small parts. Sloted storage door that twists on/off.
  • Injection molded polymer construction with steel KeyMod™ hardware.
  • Dimensions: 3.0"H X 2.2"L X 1.3"W
  • Weight: 2.9 oz.
  • Patent Pending
VMKMSL
KEYMOD™ SLING ATTACHMENT POINT
  • Low profile KeyMod™ sling attachment point mount for use with virtually any clip on style sling.
  • Attaches to KeyMod™ slots securely with two KeyMod™ bolts. Mounting tool is included.
  • Steel construction.
  • Length: 1.8"
  • Weight: 1.2 oz.
VTGLMAG
MAGPOPPER MAGAZINE DISASSEMBLY TOOL - GLOCK®
  • The innovative MagPopper tool will help you disassemble your Glock® magazines in seconds.
  • Works with most factory Glock® flat floorplates. Works with 10 round, standard capacity, and high capacity Glock® magazines.
  • Simply insert the hook from the small lever into the floor plate, rest the MagPopper body against the front of the magazine body. With one hand grasp the MagPopper and the magazine body and gently squeze. The floor plate will slide forward and unlock from the side magazine tabs with very little effort.
  • Caution magazines are under spring tension. After you have unlocked the floor plate, carefully slide/remove the floor plate, locking plate, spring, and follower from the magazine body for service/cleaning.
  • MagPopper also features: a bottle opener, a hole on the main body for mounting onto key rings, and a ¼" hex hole for holding ¼" screwdriver bits.
  • Compact design for convenient storage.
  • Steel construction.
  • US Patent Pending
  • DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither “NcSTAR Inc. & VISM” nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK tools, mounts, or optics. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts visit www.glock.com.
VALGKMQR
KEYMOD™ QUICK RELEASE COMPACT GREEN LASER
  • KeyMod™ Quick Release Compact Green Laser, low profile design gets the laser closer to the bore of the firearm.
  • Featuring NcSTAR's US Patented Auto-Locking KeyMod™ Quick Release mount. Mounts directly to KeyMod™ slots with a flip of a lever, no tools required.
  • The Green Laser operates with a single multi-function button. Press and hold down the button for more than a second and the laser powers On. Tap the button to use the Strobe feature. Press and hold down the button to power the laser Off.
  • Fully adjustable for Elevation and windage.
  • Laser runs on two CR1/3N lithium batteries (included). Battery door locks in place, depress the center button and slide door a ¼" and lift door to access battery compartment.
  • Laser body constructed of polymer, and the KeyMod™ base is made from steel.
  • US Patent 9,341,441
VALRKMQR
KEYMOD™ QUICK RELEASE COMPACT RED LASER
  • KeyMod™ Quick Release Compact Red Laser, low profile design gets the laser closer to the bore of the firearm.
  • Featuring NcSTAR's US Patented Auto-Locking KeyMod™ Quick Release mount. Mounts directly to KeyMod™ slots with a flip of a lever, no tools required.
  • The Red Laser operates with a single multi-function button. Press and hold down the button for more than a second and the laser powers On. Tap the button to use the Strobe feature. Press and hold down the button to power the laser Off.
  • Fully adjustable for Elevation and windage.
  • Laser runs on two CR1/3N lithium batteries (included). Battery door locks in place, depress the center button and slide door a ¼" and lift door to access battery compartment.
  • Laser body constructed of polymer, and the KeyMod™ base is made from steel.
  • US Patent 9,341,441
VLGIRQRB
GREEN & IR LASER DESIGNATOR W/QR MOUNT/ BLK
  • Quick Release Laser Designator with Green and IR (Infrared) Lasers.
  • Fully adjustable Green Laser on the Left Pod that can be activated in three different ways: 45 degree angled Momentary Switch, top mounted Push button On/Off switch, or the included remote pressure switch.
  • Fully adjustable IR Laser (not visible to the human eye) on the Right Pod that can be activated in three different ways: 45 degree angled Momentary Switch, top mounted Push button On/Off switch, or the included remote pressure switch.
  • IR Laser is not visible to the human eye. You need Night Vision optics/goggles or video cameras that see in the IR spectrum.
  • Top mounted red LED to indicate when the IR Laser is turned on.
  • Includes a two position remote pressure switch. The 3.5 mini jack plugs into the rear jack port of the Designator. The Green Laser and the IR Laser can be individually activated from the remote pressure switch.
  • Micro Dot base on top of the Designator Box for mounting an Optional NcSTAR Micro Dot DXGAB. Other NcSTAR Micro Dots will require an optional Micro Dot spacer for the mechanical On/Off switch.
  • Locking Quick Release Mount fits: Weaver/ Picatinny/ MIL-STD 1913 type rails
  • Black anodized aluminum body.
  • Powered by 3 volt lithium batteries (CR123A included) for longer battery life
  • Includes: remote pressure switch, battery, and adjustment tools.
  • US PATENT PENDING
VALGFSP
AR15 GREEN LASER W/A2 IRON FRONT SIGHT POST
  • AR15/M4 Green Laser with Strobe and A2 Iron Front Sight Post
  • Fully adjustable Green Laser: Freq. 532nm, Class IIIa Laser, Maximum Output: <5mw
  • A2 Front Sight Post is at the 1.5" AR15 Height for back-up iron sights. A2 Post is adjustable for elevation.
  • Ambidextrous button arrangement, two button on each side for Momentary (rear button) and Constant On/Off (forward button). Buttons are easily accessible from your support hand when grasping handguard.
  • Back of Laser features a rear mounted button for the Laser Strobe feature and a 3.5 mm jack in the back for the included remote momentary pressure switch.
  • Mounts onto Weaver/ Picatinny/ MIL-STD 1913 type rails.
  • Green Laser can extend past the edge of the handguard with the cantilever style mount design, preserving rail space and for making a more comfortable hold on the shorter Carbine Picatinny handguards.
  • Die Cast Aluminum Body with Black Anodized body
  • Uses 1 CR123A Lithium Type Battery (Included)
  • Dimensions: 3.6"L X 1.6"H X 1.4"D
  • Weight 4.5 oz. without pressure swicth
  • Weight 4.8 oz. with pressure swicth
  • US PATENT PENDING
VAPRLSMBLV2
Compact Pistol Blue Laser w/Strobe
  • Compact Pistol Blue Laser with Strobe
  • Button on each side of laser body allows the user to turn On/Off laser and when pressed and held down turns the Strobe feature On/OFF.
  • Mounts onto most Weaver / Picatinny / MIL-STD 1913/ Pistol accessory spec rails
  • Fully adjustable Blue Laser: 450nm, Max output <5mw, Class IIIa Laser
  • Features a low battery condition with a Red LED on the side of the Laser body.
  • Dimensions: 2.0L x 1.1W x 1.1H
  • Weight: 1.8 oz. with Batteries
  • Black Anodized Aluminum body
  • Uses 2 each CR1/3 N Batteries (Included)

NcSTAR Inc.

1(866)627-8278

Email:info@ncstar.com

Address:18031 Cortney Ct.

City of Industry

CA 91748 USA